View G170EG01V1_1576480.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

au optronics corporation product specification document version 0.1 1/26 g170eg01 v1 ( v ) preliminary specification ( ) final specification module 17.0? sxga color tft-lcd model name g170eg01 v1 customer date approved by note: this specification is subject to change witho ut notice. checked & approved by date debbie chiu 2011/01/13 prepared by jimmy tsai 2011/01/12 desktop display business group / au optronics corporation www..net
au optronics corporation product specification document version 0.1 2/26 g170eg01 v1 contents 1. handling precautions............................ ................................................... ............................... 4 2. general description ............................. ................................................... ................................ 5 2.1 display characteristics ........................ ................................................... ............................................ 5 2.2 optical characteristics ........................ ................................................... ............................................. 6 3. functional block diagram ........................ ................................................... ......................... 10 4. absolute maximum ratings........................ ................................................... ....................... 11 4.1 tft lcd module ................................. ................................................... ......................................... 11 4.2 backlight unit ................................. ................................................... ............................................... 11 4.3 absolute ratings of environment ................ ................................................... .................................. 11 5. electrical characteristics ...................... ................................................... ............................. 12 5.1 tft lcd module ................................. ................................................... ......................................... 12 5.2 backlight unit ................................. ................................................... ............................................... 14 6. signal characteristic........................... ................................................... ............................... 15 6.1 pixel format image............................. ................................................... ........................................... 15 6.2 the input data format .......................... ................................................... ......................................... 15 6.3 signal description............................. ................................................... ............................................. 16 6.4 timing characteristics ......................... ................................................... .......................................... 18 6.5 power on/off sequence.......................... ................................................... .................................... 20 7. connector & pin assignment ...................... ................................................... ...................... 22 7.1 tft lcd module ................................. ................................................... ......................................... 22 7.2 backlight unit ................................. ................................................... ............................................... 23 8. reliability test ................................ ................................................... .................................... 24 9. label and packaging............................. ................................................... ............................. 25 9.1 shipping label (on the rear side of tft-lcd dis play) .............................................. ...................... 25 9.2 carton package ................................. ................................................... ............................................. 25 10. mechanical characteristics ..................... ................................................... ........................ 26 www..net
au optronics corporation product specification document version 0.1 3/26 g170eg01 v1 record of revision version and date page old description new description remark 0.1 2011/01/12 all first edition for customer all www..net
au optronics corporation product specification document version 0.1 4/26 g170eg01 v1 1. handling precautions 1) since front polarizer is easily damaged, pay att ention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact wi th water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with a bsorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break o r crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open or modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the led light bar edge. instead, press at the far ends of the led light bar edge softly. otherwise th e tft module may be damaged. 10) at the insertion or removal of the signal inter face connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an en closure, do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft modu le from outside. otherwise the tft module may be damaged. 12) small amount of materials having no flammabilit y grade is used in the lcd module. the lcd module should be supplied by power complied with requireme nts of limited power source (iec60950 or ul1950), or be applied exemption. www..net
au optronics corporation product specification document version 0.1 5/26 g170eg01 v1 2. general description this specification applies to the 17 inch color tft -lcd module g170eg01 v1. the display supports the sxga+ (1280(h) x 1024(v)) screen format and 16.7m colors (rgb 6-bits+hi-frc data).all input signals are 2 channel lvds interfac e compatible. this module does not contain an inverter card for b acklight. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [mm] 432 (17.0?) active area [mm] 337.920(h) 270.336(v) pixels h x v 1280 3(rgb) 1024 pixel pitch [mm] 0.264(per one triad) 0.264 pixel arrangement r.g.b. vertical stripe display mode normally white white luminance [cd/m 2 ] 350 (center,typ)@7.5 ma contrast ratio 1000 : 1 (typ) optical responsetime [msec] 5 (typ) nominal input voltage vdd [volt] +5.0 (typ) power consumption (vdd line + led line) [watt] 22 w (typ.) (with led driver, all black pattern) weight [grams] 1800 typ. physical size (h x v x d) [mm] 358.5(h) x 296.5(v) typ. x 18.0(d) max. electrical interface dual channel lvds surface treatment anti-glare type, hardness 3h support color 16.7m colors (rgb 6-bits +hi-frc dat a) temperature range operating storage (non-operating) [ o c] [ o c] -30 to +85 -30 to +85 rohs compliance rohs compliance www..net
au optronics corporation product specification document version 0.1 6/26 g170eg01 v1 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature) : item unit conditions min. typ. max. note horizontal (right) cr = 10 (left) 70 70 85 85 - vertical (up) cr = 10 (down) 70 70 80 80 - horizon (right) cr = 5 (left) 75 75 85 85 - viewing angle [degree] vertical (up) cr = 5 (down) 75 75 85 85 - 1 luminance uniformity [%] 9 points 75 80 - 2, 3 rising - 3.5 6 falling - 1.5 3 optical response time [msec] rising + falling - 5 9 4, 6 red x tbd tbd tbd red y tbd tbd tbd green x tbd tbd tbd green y tbd tbd tbd blue x tbd tbd tbd blue y tbd tbd tbd white x 0.283 0.313 0.343 color / chromaticity coordinates (cie 1931) white y 0.299 0.329 0.359 4 white luminance (at led= 110ma) [cd/m 2 ] 280 350 - 4 contrast ratio 600 1000 - 4 cross talk (at 75hz) [%] - - 1.5 5 flicker [db] - - -20 7 optical equipment: bm-5a, bm-7, pr880, or equivalen t www..net
au optronics corporation product specification document version 0.1 7/26 g170eg01 v1 note 1: definition of viewing angle viewing angle is the measurement of contrast ratio 10, at the scre R en center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). th e 180 viewing angle range is broken down as follow s; 90 ( ) horizontal left and right and 90 ( ) vertical, high (up) and low (down). the measureme nt direction is typically perpendicular to the display surface with the screen rotated about its center t o develop the desired measurement viewing angle. note 2: 9 points position note 3: the luminance uniformity of 9 points is def ined by dividing the maximum luminance values by th e minimum test point luminance minimum luminance of 9 points w9 = m ax imum luminance of 9 points 50 % 90 % 90 % 50 % 10 % 10 % www..net
au optronics corporation product specification document version 0.1 8/26 g170eg01 v1 note 4: measurement method the lcd module should be stabilized at given temper ature for 30 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 30 minutes in a stable, wind less and dark room. note 5: definition of cross talk (ct) ct = | yb ? ya | / ya 100 (%) where ya = luminance of measured location without gray le vel 0 pattern (cd/m2) yb = luminance of measured location with gray level 0 pattern (cd/m2) center of the screen tft - lcd module 50 cm photo detector lcd panel field=2 www..net
au optronics corporation product specification document version 0.1 9/26 g170eg01 v1 note 6: definition of response time: the output signals of photo detector are measured w hen the input signals are changed from ?full black? to ?full white? (rising time), and from ?full white? t o ?full black ?(falling time), respectively. the re sponse time is interval between the 10% and 90% of amplitudes. please refer to the figure as below. note 7: subchecker pattern r g b r g b r g b r g b r g b r g b method: record dbv & dc value with (westar)trd -100 level dc hz) 30 level(at ac log 20 (db) flicker = 100 90 10 0 % optical response white black white tr f tr r 100 90 10 0 % optical response white black white tr f tr r gray level = l127 gray level = l0 amplitude time dc ac www..net
au optronics corporation product specification document version 0.1 10/26 g170eg01 v1 3. functional block diagram the following diagram shows the functional block of the 17.0 inches color tft-lcd module: pcba connector: led driver connector: jae fi-xb30ssl-hf15 3806k-f06y-03r or compatible or compatible 35 leds connector dc/dc converter lvds receiver timing controller gamma correction tft-lcd 1280*(3)*1024 pixels y - driver ic g1 g1024 d1 d3840 led driver dc power au asic rsds lvds + 5v www..net
au optronics corporation product specification document version 0.1 11/26 g170eg01 v1 4. absolute maximum ratings absolute maximum ratings of the module is as follow ing: 4.1 tft lcd module item symbol min max unit conditions logic/lcd drive voltage vin -0.3 6 [volt] note 1,2 4.2 backlight unit item symbol min max unit conditions led current icfl - 110 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating humidity hop 5 90 [%rh] storage temperature tst -20 +60 [ o c] storage humidity hst 5 90 [%rh] note 3 note 1: with in ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values note 3: for quality performance, please refer to auo iis ( incoming inspection standard). operating range storage range www..net
au optronics corporation product specification document version 0.1 12/26 g170eg01 v1 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows: symble parameter min. typ. max. unit condition vcc logic/lcd drive voltage 4.5 5.0 5.5 [volt] 10% icc input current - 1.05 1.16 [a] vin=5v , all black pattern, at 75hz irush inrush current - - 3.0 [a] note pcc vccpower - 5.25 5.8 [watt] vin=5v , all black pattern, at 75hz vccrp allowable logic/lcd drive ripple voltage - - 200 [mv] p-p with panel loading note: measurement conditions: +5.0v +12.0v vcc r1 47k r2 1k vr1 47k sw1 sw mag-spst 1 2 f1 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) 90% 10% vdd rising time 0v 5.0v 0.5ms www..net
au optronics corporation product specification document version 0.1 13/26 g170eg01 v1 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vin i s off it is recommended to refer the specifications of sn 75lvds82dgg (texas instruments) in detail. each signal characteristics are as follows; symbol parameter min typ max units condition vth differential input high threshold - - +100 [mv] vicm = 1.2v note vtl differential input low threshold -100 - - [mv] vicm = 1.2v note vid input differential voltage 100 400 600 [mv] note vicm differential input common mode voltage +1.0 +1.2 +1.5 [v] vth/vtl = 100mv note note: lvds signal waveform vt h vid vicm vss www..net
au optronics corporation product specification document version 0.1 14/26 g170eg01 v1 5.2 backlight unit parameter guideline led following characteristics are measured under stable condition at 25 (room temperature) symbol parameter min. typ. max. unit remark v led input voltage 10.8 12 12.6 volt i led input current - 1.18 - a 100% dimming p led power consumption - 14.16 - watt 100% dimming i inrush led inrush current - - 5.1 a v led rising time ~ 470us f pwm pwm dimming frequency 200 - 20k hz swing voltage high 4.5 5.0 5.5 volt v pwm dim swing voltage low - - 0.8 volt d pwm dimming duty cycle 10 - 100 % note 1,2 i f led forward current - 110 - ma ta = 25 on control voltage 3.0 3.3 5.5 volt v led on/off off control voltage - - 0.8 volt note 3, 4 operating life 50000 - - hrs note 5, 6 note 1: pwm dimming function can be operated by pwm signal. pwm duty cycle can adjust white luminance. (pwm high: on and pwm low: off) note 2: pwm signal can not be floating and pull-dow n to ground when waiting. note 3: enable ( v led on/off ) must be turned on late than v led and pwm signal. note 4: enable ( v led on/off ) must be turned off early than v led and pwm signal. note 5: if g170eg01 v1 module is driven by high cur rent or at high ambient temperature & humidity cond ition. the operating life will be reduced. note 6: operating life means brightness goes down t o 50% initial brightness. minimum operating life ti me is estimated data. www..net
au optronics corporation product specification document version 0.1 15/26 g170eg01 v1 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the inpu t signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 2 1279 1280 1st line 1024th line 6.2 the input data format note1: normally, de, vs, hs on even channel are not used. note2: please follow pswg. note3: 8-bit in www..net
au optronics corporation product specification document version 0.1 16/26 g170eg01 v1 6.3 signal description the module using a pair of lvds receiver sn75lvds82 (texas instruments) or compatible. lvds is a differential signal technology for lcd interface an d high speed data transfer device. transmitter shal l be sn75lvds83(negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxexxx) transmits even p ixels. pin # signal name description 1 rxo0 - negative lvds differentia l data input (odd data) 2 rxo0+ positive lvds differential data input (odd data) 3 rxo1 - negative lvds differential data input (odd data) 4 rxo1+ positive lvds differential data input (odd data) 5 rxo2 - negative lvds differential data input (odd data, h - sync,v - sync,dsptmg) 6 rxo2+ positive lvds differential data input (odd data, h - sync,v - sync,dsptmg) 7 gnd power ground 8 rxoc - negative lvds differential clock input (odd clock) 9 rxoc+ positive lvds differential clock input (odd clock) 10 rxo3 - nega tive lvds differential data input (odd data) 11 rxo3+ positive lvds differential data input (odd data) 12 rxe0 - negative lvds differential data input (even data) 13 rxe0+ positive lvds differential data input (even data) 14 gnd power ground 15 rxe1 - n egative lvds differential data input (even data) 16 rxe1+ positive lvds differential data input (even data) 17 gnd power ground 18 rxe2 - negative lvds differential data input (even data) 19 rxe2+ positive lvds differential data input (even data) 20 rx ec - negative lvds differential clock input (even clock) 21 rxec+ positive lvds differential clock input (even clock) 22 rxe3 - negative lvds differential data input (even data) 23 rxe3+ positive lvds differential data input (even data) 24 gnd power grou nd 25 gnd power ground (for auo test aging+hvs mode ) 26 nc no contact 27 gnd power ground 28 vcc +5.0v power supply 29 vcc +5.0v power supply 30 vcc +5.0v power supply www..net
au optronics corporation product specification document version 0.1 17/26 g170eg01 v1 note1: start from left side note2: input signals of odd and even clock shall be the same timing. note3: please follow pswg. connector 1 30 rxo in 0 - vcc www..net
au optronics corporation product specification document version 0.1 18/26 g170eg01 v1 6.4 timing characteristics 6.4.1 timing characteristics basically, interface timings described here is not actual input timing of lcd module but output timing of sn75lvds82dgg (texas instruments) or equivalent. signal item symbol min typ max unit period tv 1034 1066 2048 th active tdisp(v) 1024 1024 1024 th vertical section blanking tbp(v)+tfp(v)+pwvs 10 42 1024 th period th 750 844 2048 tclk active tdisp(h) 640 640 640 tclk horizontal section blanking tbp(h)+tfp(h)+pwhs 110 204 1408 tclk period tclk 14.81 18.52 25 ns clock frequency freq 40 54 70 mhz frame rate frame rate f 49 60 76 hz note : de mode only www..net
au optronics corporation product specification document version 0.1 19/26 g170eg01 v1 6.4.2 timing diagram hsync pixel n 1 m invalid data tdisp(v) 10 de de invalid data rgb data th 2 rgb data (even) 3 9 m-1 invalid data 1 n hsync m-2 invalid data 11 6 5 m-3 vsync invalid data clk m-5 invalid data m-4 7 2 tbp(h) pixel pixel pixel pixel pixel rgb data (odd) 12 tbp(v) tclk pixel pixel pixel pixel pixel pixel pixel pixel pixel pixel pixel pixel 8 4 3 4 tv tdisp(h) line line line line line line tfp(v) tfp(h) pwvs pwhs www..net
au optronics corporation product specification document version 0.1 20/26 g170eg01 v1 6.5 power on/off sequence vdd power and lamp on/off sequence is as follows. i nterface signals are also shown in the chart. signa ls from any system shall be hi-z state or low level wh en vdd is off. power sequence timing value parameter min. typ. max. unit t1 0.5 - 10 [ms] t2 30 40 50 [ms] t3 200 - - [ms] t4 0.5 - 10 [ms] t5 10 - - [ms] t6 10 - - [ms] t7 0 - - [ms] t8 10 - - [ms] t9 - - 10 [ms] t10 110 - - [ms] t11 0 16 50 [ms] 90% 10% 90% 10% 10% 90% 90% 90% 90% 10% 10% 10% t1 t2 t3 t4 t5 t6 t7 t10 t8 t9 t11 t12 t13 vdd signal vled back light dimming back light on/off 10% 10% 90% 90% www..net
au optronics corporation product specification document version 0.1 21/26 g170eg01 v1 t12 - - 10 [ms] t13 1000 - - [ms] www..net
au optronics corporation product specification document version 0.1 22/26 g170eg01 v1 7. connector & pin assignment physical interface is described as for the connecto r on module.these connectors are capable of accommodating the following signals and will be fol lowing components . 7.1 tft lcd module 7.1.1 connector connector name / designation interface connector manufacturer jae or compatible type part number fi-xb30ssl-hf15 or compatible mating housing part number jae fi-x30hl or compatib le 7.1.2 pin assignment pin# signal name pin# signal name 1 rxoin0- 2 rxoin0+ 3 rxoin1- 4 rxoin1+ 5 rxoin2- 6 rxoin2+ 7 gnd 8 rxoclkin- 9 rxoclkin+ 10 rxoin3- 11 rxoin3+ 12 rxein0- 13 rxein0+ 14 gnd 15 rxein1- 16 rxein1+ 17 gnd 18 rxein2- 19 rxein2+ 20 rxeclkin- 21 rxeclkin+ 22 rxein3- 23 rxein3+ 24 gnd 25 gnd (agmode+hvs) 26 nc 27 gnd 28 vcc 29 vcc 30 vcc www..net
au optronics corporation product specification document version 0.1 23/26 g170eg01 v1 7.2 backlight unit physical interface is described as for the connecto r on module. these connectors are capable of accommodating the following signals and will be fol lowing components. connector name / designation lamp connector manufacturer e&t or compatible connector model number 3806k-f06y-03r or compatible mating connector model number h208k-p06n-02b or com patible 7.2.1 signal for lamp connector pin# symbol signal name 1 vcc 12v 2 vcc 12v 3 gnd gnd 4 gnd gnd 5 display on 5v-on / 0v-off 6 dimming pwm dimming www..net
au optronics corporation product specification document version 0.1 24/26 g170eg01 v1 8. reliability test environment test conditions are listed as following table. items required condition note temperature humidity bias (thb) ta= 50 , 90%rh, 300hours high temperature operation (hto) ta= 85 , 50%rh, 300hours low temperature operation (lto) ta= -30 , 300hours high temperature storage (hts) ta= 85 , 300hours low temperature storage (lts) ta= -30 , 300hours vibration test (non-operation) acceleration: 1.5 g wave: random frequency: 10 - 200 - 10 hz sweep: 30 minutes each axis (x, y, z) shock test (non-operation) acceleration: 50 g wave: half-sine active time: 20 ms direction: x, y, z (one time for each axis) drop test height: 60 cm, package test thermal shock test (tst) -20 / 30min, 60 / 30min, 100 cycles 1 on/off test on/10sec, off/10sec, 30,000 cycles contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point. esd (electrostatic discharge) air discharge: 15kv, 150pf(330 ) 1sec 8 points, 25 times/ point. 2 altitude test operation:10,000 ft non-operation:30,000 ft note 1: the tft-lcd module will not sustain damage after being subjected to 100 cycles of rapid temperature change. a cycle of rapid temperature ch ange consists of varying the temperature from -20 to 60 , and back again. power is not applied during the t est. after temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. note 2: according to en61000-4-2 , esd class b: som e performance degradation allowed. no data lost. self-recoverable. no hardware failures. www..net
au optronics corporation product specification document version 0.1 25/26 g170eg01 v1 9. label and packaging 9.1 shipping label (on the rear side of tft-lcd display) the shipping label format is shown as below. 9.2 carton package max capacity 8 tft-lcd module per carton 8pcs.1 layers max weight: tbd kg per carton outside dimension of carton:434(l)mm*278(w)mm*390(h )mm g170eg01 v.1 www..net
au optronics corporation product specification document version 0.1 26/26 g170eg01 v1 10. mechanical characteristics www..net

▲Up To Search▲

Price & Availability of G170EG01V1

	To Download G170EG01V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .